Refinished Sewing Table
![Refinished Sewing Table](https://www.brwoodworkers.com/wp-content/uploads/2019/01/20190105_10-59-24-BRWC-ST1-e1547158092656.jpg)
![](https://www.brwoodworkers.com/wp-content/uploads/2019/01/20190105_10-59-24-BRWC-ST1-e1547158092656-1024x835.jpg)
We started with an approximately 70-years-old scratched-up tabletop. It had almost gouges in it. We followed Bob’s advice, and we are glad we did. Here are the steps we went through:
- Stripped it with Klean Strip Stripper three times
- Applied Varathane Mahogany Gel Stain
- Use a rag or lint-free towel to apply
- Wipe off the excess
- Applied oil-based satin polyurethane
- Shake the can well
- Use a lint-free rag or old T-shirt.
- Do not use a brush as it will leave bubbles
- Apply 3 or 4 coats to your taste
- Use 0000 steel wool between coats
Leave a Reply
You must be logged in to post a comment.